1982 Dodge Rampage subcompact unibody Pickup Hot Wheels 1/64

The Dodge Rampage was a subcompact unibody coupe utility based on Chrysler's L platform and manufactured and marketed from 1982 to 1984 model years. Plymouth marketed a rebadged variant for model year 1983, as the Scamp.

The Rampage combined the handling and passenger carrying characteristics of a traditional passenger car with the open-bed versatility and load capacity of a small pickup truck, similar to its competitors: the Volkswagen Rabbit Sportruck and Subaru BRAT.

The Rampage borrowed the car's unibody construction and front end panels and components from the Dodge Omni 024 (later renamed the Charger), using the suspension from its parent vehicles with coil struts and a linkless sway bar at the front, and leaf springs with shock absorbers unique to the Rampage at the rear.

The Rampage was available with a Chrysler-built and designed 2.2 L carbureted inline-four engine with 84 hp (63 kW) to 99 hp (74 kW) depending on the year, a curb weight of around 2,400 lb (1,100 kg) and used a four-speed manual transmission or three-speed automatic transmission. These arrangements gave the vehicle limited performance.

Performance was improved with the introduction of a five-speed manual transmission in 1983. The truck had a load capacity of 1,145 lb (519 kg), for a true "half ton" rating and about 90% that of the Chevrolet El Camino’s rating of 1,250 lb (570 kg).

In 1984, the Rampage received a facelifted front fascia shared with the Charger, with quad 165 mm x 100 mm sealed beam headlights opposed to the dual 200 mm x 142 mm sealed beam headlights found on previous models. The grille was also changed, switching from a 6-slot design to a vertically split design. The lower bumper featured revised indicators, a horizontally split lower air intake, and an impact strip that wrapped around the front end.

The Plymouth Scamp was only marketed for 1983. The Rampage lasted three years before being dropped from production after the 1984 model year. There was a "Shelby Rampage" built by Chrysler/Shelby engineers in their free time for Carroll Shelby, but there is no official record of the existence of such a vehicle. However, a special California market "Direct Connection" Rampage was built in 1984 and only sold at certain California-area Dodge dealerships, which featured the front fascia from the Shelby Charger, 15-inch alloy wheels, and a ground effects package.

Only 250 "Direct Connection" Rampages were produced. 1/3 Black 1/3 Garnet Red 1/3 Santa Fe Blue.

The Dodge Rampage produced sales of 17,636 in 1982, 8,033 in 1983, and 11,732 in 1984 — and total sales for the Plymouth Scamp were 2,184 base models and 1,380 for the Scamp GT.

1999 Hot Wheels Dodge Ram Van Race Team 1:64

The Dodge Ram Van (also known as the Dodge B-series) is a range of full-size vans that were produced by Chrysler Corporation from the 1971 to 2003 model years. Replacing the Dodge A100, the Ram Van transitioned to a front-engine drivetrain configuration. Mostly offered as a cargo van and a passenger van, the model line was also initially offered as a cutaway van chassis.

The B-series van line was produced across 32 years of production, making it among the longest-lived platform designs in American automotive history. Much of the exterior and chassis underpinnings saw only gradual changes during their entire production, with three distinct generations developed. Alongside its use by Dodge, the full-size van range saw rebranding during the 1970s for both Fargo Trucks and Plymouth (marking the debut of the Plymouth Voyager nameplate).

For much of its entire production run, Chrysler produced B-platform vans at the now-demolished Pillette Road Truck Assembly plant in Windsor, Ontario, Canada; prior to 1980, the model line was also produced at Saint Louis North Assembly (Fenton, Missouri). In 2003, the Dodge Sprinter (a rebranding of its Mercedes-Benz namesake) was introduced, replacing the B-series van entirely from 2004 to 2009. Since 2014, the Ram division has offered the ProMaster to the full-size van market, a rebranded Fiat Ducato

1970 Dodge HEMI Challenger R/T Johnny Lightning 1:24

The Dodge Challenger is the name of three different generations of automobiles (two of those being pony cars) produced by American automobile manufacturer Dodge. However, the first use of the Challenger name by Dodge was in 1959 for marketing a "value version" of the full-sized Coronet Silver Challenger.

From model years 1970 to 1974, the first generation Dodge Challenger pony car was built using the Chrysler E platform in hardtop and convertible body styles sharing major components with the Plymouth Barracuda.

The second generation, from model years 1978 to 1983, was a badge engineered Mitsubishi Galant Lambda / Sapporo, a coupe version of an economical compact car.

The third and current generation is a pony car that was introduced in early 2008 originally as a rival to the evolved fifth generation Ford Mustang and the fifth generation Chevrolet Camaro.

In November 2021, Stellantis announced that 2023 model year would be the final model year for both the LD Dodge Charger and LA Dodge Challenger, as the company will focus its future plans on electric vehicles rather than fossil fuel powered vehicles, especially with tougher automotive emissions standards of being rolled out and required by the Environmental Protection Agency for the 2023 model year.

Introduced in the autumn of 1969 for the 1970 model year, the Challenger was one of two Chrysler E-body cars, the other being the slightly smaller Plymouth Barracuda. Positioned to compete against the Mercury Cougar and Pontiac Firebird in the upper end of the pony car market segment,[8] it was "a rather late response" to the Ford Mustang, which debuted in April 1964. Even so, Chrysler intended the new Challenger as the most potent pony car ever, and like the less expensive Barracuda, it was available in a staggering number of trim and option levels, and with virtually every engine in Chrysler's inventory.

The first usage of the "challenger" name was for a trim package in 1959 called the Dodge Silver Challenger which was a two-door coupe only.

The Challenger's longer wheelbase, larger dimensions, and more luxurious interior were prompted by the launch of the 1967 Mercury Cougar, likewise, a bigger, more luxurious, and more expensive pony car aimed at affluent young American buyers. The 110 in (2,800 mm) wheelbase was 2 in (51 mm) longer than the Barracuda's, and the Dodge differed substantially in its sheet metal, much as the Cougar differed from the shorter-wheelbase Mustang. Air conditioning and a rear window defogger were optional. With 1971 being the sole exception, the front ends of both cars differed from each other in that the Challenger had four headlights and the Barracuda had only two; a trend replicated by offerings from Chrysler's rivals.

The exterior design was penned by Carl Cameron, who was also responsible for the exterior designs of the 1966 Dodge Charger. Cameron based the 1970 Challenger grille on an older sketch of a stillborn 1966 Charger prototype that was to have a turbine engine. The pony car segment was already declining by the time the Challenger arrived. Sales fell dramatically after 1970, and though sales rose for the 1973 model year with over 27,800 cars being sold, Challenger production ceased midway through the 1974 model year. A total of 165,437 first-generation Challengers were sold.

1992 Dodge Viper RT/10 Burago 1:24

Fase I SR (1992-1995)

El primer prototipo del Viper fue probado en enero de 1989. El debut de este fue en 1991 con dos modelos de pre-producción como el coche de seguridad para la carrera de la 500 millas de Indianápolis.

Salieron a la venta en enero de 1992 como el RT / 10 Roadster .

La pieza central del coche era su motor. La marca y empresa Lamborghini, entonces propiedad de Chrysler Corporation, diseñó el motor V10 del Viper por la composición del bloque y cabezas de aluminio en una aleación , y se basa en el motor V8 de Chrysler. El mayor contribuyente para el diseño y construcción del Viper desde sus inicios fue el Ing. Dick Winkies jefe de ingeniería que había pasado un tiempo en Italia.

1987 Dodge D100 Pick Up Baja Blazeers Mopar Hot Wheels 1:64

The D/W series is a line of pickup trucks that was sold by Dodge from October 1960 to September 30, 1993. The same basic design was retained until the October 1993 introduction of a completely redesigned Ram. The D/W series shared its AD platform with the Dodge Ramcharger/Plymouth Trail Duster twins. 4x2 models were designated D, while 4x4 models were designated W.

This final generation received a facelift in October 1980 when the D series was rebadged as the Dodge Ram pickup around when Lee Iacocca took charge of the ailing Chrysler Corporation. Such things including an embossed "DODGE RAM" name on the tailgate along with other obvious changes like the grille and hood, the taillights, and the entire interior. More subtle was the addition of a "shoulder" line reminiscent of the GM competition. Beginning in 1982, even more corrosion-resistant steel was used in the construction of the trucks. This body style continued until 1993 and many of these vehicles are still on the road. Many body panels are interchangeable for all models from 1971 to 1993, so it is not uncommon to see a "hybrid" with, as an example, a 1978 grille mounted with a 1974 hood and a 1991 cab. Sometimes the bed is swapped with a moving truck style box for models like these. In most jurisdictions, the year is dictated by the year of the truck's chassis regardless of the body which has been bolted to it. Also kept was the narrow Utiline bed that dated back to the 1940s; this was dropped in 1985. Throttle-body injection was introduced in 1988.

A narrower range of engines was offered: the base power plant was the 225 cu in (3.7 L) slant-6, now with top-fed hydraulic tappets, and the 318 cu in (5.2 L) and 360 cu in (5.9 L) LA-series V8s. The slant-6 was supplanted by the 3.9 L (237 cu in) V6 for 1988; in 1992 it and the V8s became Magnum engines. The 6BT 5.9 L (360 cu in) 12-Valve Cummins B-series diesel engine became an option in 1989.

Sales were good during the Sweptline era and into the late 1970s. A combination of stagnant styling that was nearly two decades old plus brand loyalty primarily to Chevrolet and Ford during the 1980s and 1990s reduced sales volume for the first-generation Dodge Ram. A wholly new Dodge Ram was released for the 1994 model year.