2001 Mini Cooper Burago 1:18

The Mini is a two-door compact city car that was produced by the British Motor Corporation (BMC) and its successors from 1959 until 2000. The original Mini is considered an icon of 1960s British popular culture. Its space-saving transverse engine and front-wheel drive layout – allowing 80% of the area of the car's floorpan to be used for passengers and luggage – influenced a generation of car makers. In 1999, the Mini was voted the second-most influential car of the 20th century, behind the Ford Model T, and ahead of the Citroën DS and Volkswagen Beetle. The front-wheel-drive, transverse-engine layout of the Mini was copied for other "supermini" designs including the Honda N360 (1967), Nissan Cherry (1970), and Fiat 127 (1971). The layout was also adapted for larger subcompact designs.

This distinctive two-door car was designed for BMC by Sir Alec Issigonis. It was manufactured at the Longbridge plant in England located next to BMC's headquarters and at the former Morris Motors plant at Cowley near Oxford, in the Victoria Park/Zetland British Motor Corporation (Australia) factory in Sydney, Australia, and later also in Spain (Authi), Belgium, Italy (Innocenti) Chile, Malta, Portugal, South Africa, Uruguay, Venezuela, and Yugoslavia (IMV).

The Italian version of the Mini which was sold under the Innocenti marque was produced in Lambrate, a district of Milan.

The Mini Mark I had three major UK updates: the Mark II, the Clubman, and the Mark III. Within these was a series of variations, including an estate car, a pick-up truck, a van, and the Mini Moke, a jeep-like buggy.

The performance versions, the Mini Cooper and Cooper "S", were successful as both race and rally cars, winning the Monte Carlo Rally in 1964, 1965, and 1967. In 1966, the first-placed Mini (along with nine other cars) was disqualified after the finish, under a controversial decision that the car's headlights were against the rules.

On its introduction in August 1959, the Mini was marketed under the Austin and Morris names, as the Austin Seven and Morris Mini-Minor. The Austin Seven was renamed Austin Mini in January 1962 and Mini became a marque in its own right in 1969. In 1980, it once again became the Austin Mini, and in 1988, just "Mini" (although the "Rover" badge was applied on some models exported to Japan).

BMW acquired the Rover Group (formerly British Leyland) in 1994, and sold the greater part of it in 2000, but retained the rights to build cars using the Mini name. Retrospectively, the car is known as the "Classic Mini" to distinguish it from the modern, BMW influenced MINI family of vehicles produced since 2000.

1955 BMW 507 1:24 Motormax

 

 

The BMW 507 is a roadster that was produced by BMW from 1956 to 1959. Initially intended to be exported to the United States at a rate of thousands per year, it ended up being too expensive, resulting in a total production figure of 252 cars and heavy financial losses for BMW.

The BMW 507 was conceived by U.S. automobile importer Max Hoffman who, in 1954, persuaded the BMW management to produce a roadster version of the BMW 501 and BMW 502 saloons to fill the gap between the expensive Mercedes-Benz 300SL and the cheap and underpowered Triumph and MG sports cars. BMW engineer Fritz Fiedler was assigned to design the rolling chassis, using existing components wherever possible. Early body designs by Ernst Loof were rejected by Hoffman, who found them to be unappealing. In November 1954, at Hoffman's insistence, BMW contracted designer Albrecht von Goertz to design the BMW 503 and the 507.

Thirty-four Series I 507s were built in 1956 and early 1957. These cars had welded aluminium fuel tanks of 110 litres (29.1 US gal) capacity behind the rear seats. These large tanks limited both boot space and passenger space, and gave off the smell of fuel inside the car when the soft top was up or the hardtop was in place. Series II and later 507s had fuel tanks of 66 litres (17.4 US gal) capacity under the boot, shaped around the space for the spare tyre.

Pony Up Hot Wheels 1:64

From Fandom:

The Pony-Up is a contemporary muscle car designed by Mark Jones.

The tooling for the casting was updated around 2015, with the casting gaining a new overhauled interior and a slightly different base.

•  Pony-Up
• Debut Series First Editions
• Produced 2002 - Present
• Designer Mark Jones
• Number 52926

1995 Chrysler Atlantic Concept Guiloy Made In Spain 1:24

The Chrysler Atlantic was a retro concept car created by Chrysler. It was first shown in 1995. The Atlantic was designed by Bob Hubbach and inspired by the Bugatti Atlantique. The idea for this car began out as a sketch on a napkin by Chrysler's president Bob Lutz in early 1993 and also involved the automaker's chief designer, Tom Gale.

The Atlantic has several similarities to the opulent vehicles of the 1930s such as the aforementioned Bugatti Type 57S Atlantique (or Atlantic). Its styling is also more than a little inspired by the Talbot-Lago T150 SS Coupe that was constructed in 1938, such as the shape of the side windows and the curved boot. Some of the retro details include a straight-8-engine that was actually constructed from two 4-cylinder Dodge Neon engines with an S configuration 4.0 L., which is rarely used in modern cars. Other retro touches to the car's look include the interior that is replete with Art Deco-style gauges. The Atlantic Concept has around 360 horsepower (268.5 kW) and uses Chrysler's Autostick transmission. Riding on a 128-inch (3,251 mm) wheelbase, its front wheels measure 21 inches and 22 inches in the rear — large at that time.

It was one of Chrysler's most popular concept vehicles and has proven popular enough to still make the occasional public appearance.

The Atlantic's popularity has also allowed its overall design and image to be associated as part of both advertising and labeling of packages associated with a variety of automotive car care products, accessories, and electronics.