1999 Ford Mustang GT Welly 1:24

MUSTANG GT:

Following the base Mustang in December 1993, the Mustang GT was reintroduced in January 1994, featuring higher performance and better handling than the base Mustang or its 1993 predecessor. Ford carried over the 302 CID pushrod small-block V8 engine (called the "5.0 L" although its actual dispacement was 4.94 L) from the 1993 Mustang GT. Total output from the engine was 215 hp (160 kW; 218 PS) at 4200 rpm and 285 lb⋅ft (386 N⋅m) of torque at 3400 rpm. Mustang GTs could deliver zero to 60 mph (97 km/h) acceleration times in the high-six second range and complete a quarter-mile in about 15 seconds. The Mustang GT also featured a stiffer handling suspension, a 3.08:1 rear axle ratio (later changed to 3.27:1 or 3.55:1 depending on the transmission and model year), dual exhausts, and larger 16-inch (410 mm) wheels (compared to the base Mustang's 15-inch wheels). The 1994 Mustang GT was named Motor Trend Car of the Year.

For 1995, a one-year model referred to as the Mustang GTS was introduced. This was considered to be a "stripped down" version of the Mustang GT that included the performance parts of the GT model, but a minimum of non-performance related features, similar in concept to the 5.0 LX Fox-body. The 1995 GT was the last year of the 5.0 pushrod V8 engine.

In 1996, Ford dropped the 302 CID small block V8 that was in production since 1968 and introduced the Modular 4.6 L SOHC V8. These engines were produced at two different plants, Windsor and Romeo. A "W" in the VIN 8th digit indicates a "Romeo" engine, while an "X" indicates a "Windsor".

The Windsor and Romeo have subtle differences. Valve cover bolt patterns are one. Romeo has fewer bolts than the Windsor. Another difference is the front cover bolts. The Windsor uses 8 mm and the Romeo uses 10 mm bolts. The Romeo uses jack screws on the main caps and the Windsor uses dowels. The new engine produced 215 hp (160 kW; 218 PS) at 4400 rpm and 285 lb⋅ft (386 N⋅m) of torque at 3500 rpm, matching the output of its predecessor. For 1998, the 4.6 L V8 received a small increase in output, resulting in 225 hp (168 kW; 228 PS) at 4750 rpm and 290 lb⋅ft (393 N⋅m) of torque at 3500 rpm. This was achieved through PCM calibration and a modified fuel system. Though capable of matching or exceeding the older 302 V8's output, the 4.6 L V8 was criticized for delivering inadequate performance, particularly against the larger displacement of the OHV V8 used in the Mustang's chief rival, the Chevrolet Camaro.

1940 Ford Convertible Hot Wheels 1:64 All Stars

From the back of the 2008 All Stars card:

Born: 1940

Birthplace: Dearborn, Michigan, USA

Designer: Ford Motor Company

Specialty: Slammed with fat tires in the back and smoothed out with no bumpers or handles, this hot-rodder favorite was made for cruising to the drive-in or showing off on the main drag.

1969 Ferrari 356 GTB/4 Daytona 1:24

The Ferrari Daytona, officially designated the Ferrari 365 GTB/4, is a two-seat grand tourer by Ferrari from 1968 to 1973. It was introduced at the Paris Auto Salon in 1968 to replace the 275 GTB/4, and featured the 275's Colombo V12 bored out to 4,390 cc (4.4 L; 267.9 cu in). It was offered in berlinetta and spyder forms.

The Daytona was succeeded by the mid-engined 365 GT4 Berlinetta Boxer in 1973.

The unofficial Daytona name is reported to have been applied by the media rather than Ferrari and commemorates Ferrari's 1-2-3 finish in the February 1967 24 Hours of Daytona with a 330 P3/4, a 330 P4 and a 412 P. To this day, Ferrari itself only rarely refers to the 365 as the "Daytona", and refers to it as an "unofficial" name.

1958 Chevrolet Impala 1:24 Motormax

The Chevrolet Impala (/ɪmˈpælə, -ˈpɑːlə/) is a full-size car built by Chevrolet for model years 1958 to 1985, 1994 to 1996, and 2000 until 2020. The Impala was Chevrolet's popular flagship passenger car and was among the better selling American-made automobiles in the United States.

For its debut in 1958, the Impala was distinguished from other models by its symmetrical triple taillights. The Chevrolet Caprice was introduced as a top-line Impala Sport Sedan for model year 1965, later becoming a separate series positioned above the Impala in 1966, which, in turn, remained above the Chevrolet Bel Air and the Chevrolet Biscayne. The Impala continued as Chevrolet's most popular full-size model through the mid-1980s. Between 1994 and 1996, the Impala was revised as a 5.7-liter V8–powered version of the Chevrolet Caprice Classic sedan.

In 2000, the Impala was re-introduced again as a mainstream front-wheel drive car. As of February 2014, the 2014 Impala ranked No. 1 among Affordable Large Cars in U.S. News & World Report's rankings. When the tenth generation of the Impala was introduced for the 2014 model year, the ninth generation was rebadged as the Impala Limited and sold only to fleet customers through 2016. During that time both versions were sold in the United States and Canada. The tenth-generation Impala was also sold in the Middle East, and South Korea.

1936 Ford Deluxe Cabriolet Welly 1:24

Chevrolet regained the sales lead at the end of 1936, but the Ford still sold well. A new club cabriolet model was introduced with a fully framed windshield and weatherproof top, and the convertible sedan gained the popular integrated trunkback design.

The look was updated with an inverted pentagonal grille with all-vertical bars beneath a prominent hood and three horizontal chrome side strips (on DeLuxe models). The V8 DeLuxe was called Model 68. A concealed horn, long a prominent part of the Ford's design, also brought the car into modern times. The new trucks continued with the old grille. Other major changes for 1936 were the use of pressed steel "artillery" solid wheels instead of wire wheels.